Make a subtle difference to the exterior of your Model Y with our Logo decals.These feature:
Stand out with Carbon Fiber, choose the sleek brushed metallic finishes or blend in and match with your paint color. Sold as a set of two (front and back). Early Model Y's have alignment holes behind the front and rear logos, so if you're thinking about 'de-badging' rather than covering the logos, bear that in mind, as the holes will need to be filled and painted.
Like everything we sell, anyone can install these. In fact, they take about 10 seconds (literally!), and are completely tool-free! Just make sure the logo is clean, apply the vinyl piece, and remove the carrier sheet - done! Both parts of the logo are perfectly positioned on the carrier sheet, so the installation is a breeze!
We've made these in the usual vinyl metallic and textured finishes, as well as colors that match your Model Y (note, they're the closest color 3M makes, but not a perfect match):
We'd love to see pictures of your installed decals, please @mention us on Instagram at @teslaccessories
To start, ensure the target emblem is clean and cool. You need to position yourself in-line with the emblem, so if you have a stool to perch on, grab that, and position yourself square-on to the emblem you're applying the decal to.
Now carefully remove the decal from the white backing sheet, ensuring both pieces stay attached to the clear carrier sheet. The top 'arc' piece is quite fragile, so take extra care with it.
Now present the decal to the emblem on your car. for the "T" logo, use the bottom of the 'v' indent of the T as your first alignment point. Once you think you are level and in the right spot, apply very light pressure to allow the decal to grab, but not stick permanently.
Now take the time to look at all the edges to make sure they're prefect. The emblems have a small radius (curve) on all edges, and it's not the intent for our decals to completely cover them. Instead, we're aiming to cover the entire flat surface, leaving a peek of chrome on all the edges; this is what you're aiming for.
Once you're happy with the positioning, apply even pressure all over, then carefully and slowly remove the clear transfer tape, ensuring the vinyl decal stays in place.