Search Login

Search

Sale

Center Console Shell for Model 3 & Y (Gen1 Center Console)

fitment
Model 3/Y (1st Gen Console)
Installation
install difficulty:

4 items left

Please make a selection on all options

Note: These are for the Model Year 2018-20 Model 3 and 2019-20 Y with the original  "First Gen" center console. Refer to the picture below if you're now sure which one you have. If you have the Second Gen center console, take a look at this wrap instead. 

Center Console Picker

Our four-piece Center Console Shell is a great alternative to our vinyl wraps for the Gen 1 Center Console (pre 2021 Model 3/Y). 

Custom designed for Abstract Ocean, this is made with rigid ABS plastic, and finished in either a satin black, satin white or satin carbon fiber finish. None of the options interfere with the keycard functionality, and the smooth surface is resistant to stains and marks, and any clean-up is easy.

On top of all that, this certainly requires less of a 'knack' to fit, and results in a beautiful finish that looks like it came from the factory. Installation is a breeze with 3M tape and takes only about 10 minutes. This is an easy way to transform the interior of your Model 3/Y while covering up the dust-prone, fingerprint-trapping piano black plastic.

Watch in your Tesla! aohelp.me/shell 

Watching the video is the best way to know how to install this, however, some quick tips:

  • 'dry fit' (i.e. don't remove the film from the adhesive tape) each piece first so you have a feel for how it located.
  • As you fit each piece, gently lower it down and do not apply any pressure until you're happy with the positioning.
  • Important: Pay close attention to the alignment; if it's off, it could restrict the opening of the middle and/or top panel

 Need to remove it? 

  1. Gently heat each panel with a hairdryer, this will help soften the adhesive
  2. Carefully, but deliberately, lift the shell piece from one side
  3. When you can, use your other hand to provide support to the center console panel, to ensure that's not removed with the shell piece
  4. Continue to remove the shell piece. If any adhesive foam is left, just roll it away with your thumb