Installing Glass Decals

Glass decals are really easy to install. On the more intricate designs, you need to make sure that when you're peeling back the film, all the vinyl stays on the glass, and doesn't get peeled away. With that said, here's how to do it:

  1. Clean the area. We're assuming it's going on glass, but the same applies if it's going on paintwork, your laptop, or anything else! Use the included wipe to ensure the target surface is clean, and free of any surface treatments that might otherwise affect the adhesion.
  2. When you're ready, remove the backing paper, and gently lay the decal where you want it to go. Step back, and double check positioning, and that it's level.
  3. Now use the squeegee to transfer the decal to the glass. Apply firm, even pressure, in all directions.
  4. Now slowly peel back the clear sheet and an acute angle. Watch for any smaller pieces of the vinyl lifting with it, rather than staying on the glass. If this happens, just lower the clear sheet, re-squeegee that section, and continue.
  5. Step back, and admire your work!