BLACK FRIDAY STARTS NOW! - use code ItsBeenAYear

Next Previous

Vinyl Door Handle Trims for Model 3 & Y (4 pack)

$15.99

Installation
install difficulty:

Make a subtle difference to the exterior of your Model 3/Y with our vinyl door handle trims. Stand out with Carbon Fiber, choose the sleek brushed metallic finishes or blend in and match with your paint color. This is a 4-pack, one for each handle.

Like everything we sell, anyone can install these. In fact, they take about 10 seconds per handle, and are completely tool-free! Just make sure the handle is clean, apply the vinyl piece, and remove the carrier sheet - done! We've opted not to wrap the entire handle, as the fitment is really difficult, and there's always odd creases or fold that makes it very obvious that it's not a factory-finish. Instead, ours apply to the face of the handle, leaving just a tiny bit of the chrome peeking around the edges. You can watch the video below.

Featuring:

  • 3M 2080 Vinyl - the best on the market
  • Tool-free installation - incredibly easy, they take just a few seconds each
  • No complicated wrapping and awkward folds or corners to hide
  • Clear carrier sheet to make fitting them so easy - align and apply without ever touching the back of the vinyl

We've made this in the usual vinyl metallic and textured finishes, as well as colors that match your Model 3/Y (note, they're the closest color 3M makes, but not a perfect match). It's difficult to capture the depth of the vinyl in the photos (depending on the light, angle etc).

 

These are super easy, the main thing to take care of ahead of time is that the surface of the handle is clean, and relatively cool. If you have a little stool you can sit on, grab that, and position yourself at eye level to the door handles.

Carefully remove the decal/trim from the white backing sheet, ensuring the vinyl stays attached to the clear carrier sheet.

Now present the decal to the handle (holding it by the clear transfer film) and, looking at all the edges and corners, gently apply it with a very light touch, in case you need to re-position it. Once you're happy with the position, apply firmer pressure (maybe using a microfiber cloth, or something else that will evenly spread the pressure).  Finally, remove the transfer tape by gently and slowly pulling back at a sharp angle.