Search Login


Installing the Model 3 Air Intake Vent Cover


  1. Open the frunk
  2. Remove the large plastic cover at the top of the frunk, near the windscreen/windshield. It just snaps on and off, no tools are needed.
  3. This reveals the intake for the AC; first try a 'dry fit' by placing the intake filter in place. If the area where the adhesive tape will make contact is dusty or dirty, first clean it with a damp cloth and allow to dry.
  4. Now remove the red film protecting the adhesive foam and simply place the cover in the intake opening
  5. Replace the large cover, and close the frunk.
  6. Done!